IB100 Inspection Booths
Our conformal coating inspection booths are ideal work station for either a single or dual operators to inspect printed circuit boards that have been conformally coated.
The booths are also suitable for rework, de-masking, repair, and finishing circuit boards as part of the production process.
IB100 Single inspection booth
Standard features
- Floor standing inspection booth with plinth for operator seating.
- One set of twin UVA lighting tubes fitted in the ceiling enclosure behind a UV transmittable laminate panel for in-situ inspection, with individual switch.
- Single spigot inlet for connection to suitable extraction, for low level use of solvent coatings.
- Externally powder coated framework to give lasting cosmetic finish.
Downloads
IB101 double inspection booth
The IB101 double inspection booth is ideal for dual operator inspection and finishing purposes or one operator with an inspection lamp.
Standard features
- Floor standing inspection booth with plinth for operator seating.
- Two sets of twin UVA lighting tubes fitted in the ceiling enclosure behind a UV transmittable laminate panel for in-situ inspection, with individual switch.
- Dual spigot inlets for connection to suitable extraction, for low level use of solvent coatings.
- Externally powder coated framework to give lasting cosmetic finish.
Downloads
Specification
|
DETAILS
|
IB100
|
IB101
|
| Dimensions (approx) W x H x D |
1045mm x 1735mm x 850mm
|
1545mm x 1735mm x 850mm
|
| Height of aperture: |
390 mm
|
390mm
|
| Width of aperture: |
1000mm
|
1500mm
|
| OPTIONS | ||
| Teflon coated interior panels for easy clean |
YES
|
YES
|
| FACILITIES | ||
| Electricity |
3A Single phase electricity supply
|
3A Single phase electricity supply
|
| Extraction (0.5 m/s face velocity) |
420 cfm with one 150mm diameter extraction connection required
|
630 cfm with two 150mm diameter extraction connections required
|
Conformal coating inspection and finishing
An important point in the conformal coating process is the inspection and finishing of a printed circuit board.
To complete this process it is important to create the optimum environment where an operator can easily inspect the coated circuit boards without fatigue to body or eyes.
This provides the highest quality results for the conformal coating process and keeps the operator safe from the harmful effects of solvents.
Finishing is where conformal coating is applied by brush coating after de-masking or after conformal coating application processing where the quality of the coating finish can be improved to meet the IPC standards.
SCH Technologies have designed, manufactured, and utilise a range of purpose-built, compact UV inspection & finishing booths for conformal coating inspection that have been optimised to offer the best inspection environment without compromise to health & safety, coupled with ergonomic design to minimise operator fatigue.
Inspection FAQs
UV inspection links
Downloads
- DS101 Dip coating system
- DS102 Dip coating system
- Inline and batch conformal coating dip system
- DC100 Drying cabinet
- CB100 spray booth
- UV200 UV Curing conveyor system
- UV Cure equipment
- IB100 Inspection booth
- IB101 Inspection booth
- Positector coating thickness measurement system
Links
Contact us
If you would like to know more about coating services or other products and services offered and supported by SCH Technologies, please do not hesitate to contact us.
Call us on +44 1226 249019, email us at sales@schservices.com or click Contact Us to send us your requests.
