Reusable conformal coating masking boots are a highly cost effective alternative masking material to masking tape.
Many components on printed circuit boards must remain uncoated when applying conformal coating. The purpose of masking is to prevent migration of the conformal coatings into components and keep out areas.
Custom made masking boots can offer a labour saving alternative in both the masking and de-masking stages of the coating process.These completely reusable masking boots are applied over the components such as connectors,
These completely reusable masking boots are applied over the components such as connectors, plugs and sockets that require protection from the conformal coating applied. They can be simple boots that fit over the top of a connector or a more sophisticated design such as the examples below.
They provide reliable protection for many different types of components for all the conformal coating application techniques that include batch and selective robotic spraying (as an alternative to difficult technical programming), vertical and horizontal dipping and vapour deposition of coatings such as Parylene.
Three reasons to switch from tape to reusable masking boots for conformal coating masking
These simple reasons can save you up to 80% of your costs compared to masking tape:
1. The masking application time is reduced. Masking boots can be 4-5 times quicker than masking tape.
2. The de-masking (removal) time is reduced. Again it is much quicker to remove boots compared to masking tape.
3. It is much less likely that the masking boot will leak and the component requires rework. Masking boots don’t leak and tapes can.
This means you can save a lot of money very quickly when switching to conformal coating masking boots compared to masking tapes.
Want to find out more about masking printed circuit boards before applying conformal coating?
Contact us to discuss your needs and let us explain how we can help you.
Or, read more on cleaning circuit boards on our website now.
Contact us now.
